Terms & Conditions
1.1 All electrical installation works shall comply with current BS7671 Wiring Regulations as well as
Building Regulations together with any amendments in force at the time of the works.
1.2 In case of an alteration or addition to the existing installation, estimated costs assume that the
existing installation and supply meet all relevant regulations and requirements to enable completion
of listed works. Otherwise, additional cost may be incurred bringing the installation up to relevant
and required regulations of the latest version of BS7671 Wiring Regulations.
1.3 Unless stated otherwise, all cables will be concealed by chasing into the building fabric or
concealed in building voids, under floorboards etc. Where impracticable, cabling will be neatly
surface run, either clipping direct or housed in conduit or trunking.
1.4 Where carpet or floor coverings require lifting to allow concealed installation work best
endeavours will be made to avoid damaging the coverings and to refit them to an acceptable
standard. However, consideration should be given to employing a specialist fitter at the clients cost
to effect a fully satisfactory reinstatement.
1.5 Where agreed in advance chases to walls etc will be made good with one coat of bonding. Final
finish and final decoration is excluded.
1.6 All endeavours will be made to undertake installation work to a clean standard utilising dust
sheets and vacuum cleaning/extraction equipment as necessary.
1.7 Unless otherwise stated, removal of excess materials or packaging from site, remaining from
works being or carried out at the Client’s property is the Client’s responsibility.
1.8 Some disruption of the power supply is inevitable when carrying out electrical works. It is the
client’s responsibility to make arrangements to cover any consequence arising from the temporary
loss of power (tropical fish tanks, freezers etc.)
2.1 Clearing and/or moving furniture and obstructions blocking access to the work areas is the
responsibility of the client.
2.2 It is the responsibility of the client to remove and/or protect any items that may suffer damage
during the works. Whilst every effort will be made to take reasonable precautions against damage of
personal property, fixtures and fittings, ornaments, paintings, furniture etc., the responsibility for
the safe keeping of these items remains with the client.
2.3 It is the Client’s responsibility to ensure there is a free and uninterrupted access to the property
during installation. Otherwise, additional cost may occur.
2.4 Except where agreed builders work (creating of holes larger than 50mm diameter, creating off
support structures, etc.) are not included except as outlined above.
3. Extras and Variations:
Any extras or variations not outlined in the original work must be agreed in writing before
commencement of works. (To be noted in the contract at start of works)
4.1 The estimated costs assume continuous and unhindered access to the work area between the
standard working hours 8 am – 5 pm, unless negotiated by prior arrangement.
4.2 Any additional work required and not covered by the original quote will be charged at standard
per hour rates.
4.3 All quotations are valid for 30days from the date of the quotation with works commencing within
60 days of the quotation.
4.4 Staged payments negotiated in advance are required on all contracts in excess of £500 ranging
from 10% to 50% based on the contractor’s initial outlay.
5. Deviations from building regulations and BS7671:2008:
Should the Client require works to be carried out that depart from the Building Regulations and
BS7671:2008 written instruction will be required and the works will be carried out at the sole
discretion of MGB Electrical Solutions Limited.
6. Risk and Title of Goods:
6.1 All goods stored on the clients site shall be the responsibility of the client to protect against theft
6.2 All goods supplied remain the property of MGB Electrical Solutions Limited until full and final
payment of the invoice.
7.1 All work is guaranteed against poor workmanship and defective parts for a period of 12 months
from the date of the invoice. This warrantee does not extend to any parts not supplied by MGB
Electrical Solutions Limited, physical damage to products or any instances where the works have
been altered or tampered with subsequently by third parties.
7.2 An extended warrantee is available via a third party company. Details will be supplied on
completion of the contract.
8.1 Unless by prior written arrangement payment is due on completion of the contract. Final
documentation will be supplied on clearance of funds only.
8.2 MGB Electrical Solutions Limited reserves the right to claim late payment, interest and
compensation for debt recovery. Costs will be charged on overdue invoices using the entitlements
provided by the late payment legislation.
9. Suspension and Termination
9.1 If the Client is in breach of these Terms and Conditions and such breach is capable of remedy, the
Company may suspend the provision of the Services and require the Client to remedy the breach
within specified period.
9.2 If the Client is in breach and such breach is not capable of remedy, the Company may
immediately terminate the provision of the Services.
9.3 Either party may terminate the provision of the Services if additional charges are required and
the Client does not approve these.
10. Consequences of Termination.
Following termination of the Services (including in accordance with clause 9.3), the Company shall
remove from the Client’s premises all tools, materials and other Company property; and use all
reasonable endeavours to ensure that electrical installation worked on is left in a safe condition,
provided that the Company shall have no liability in respect of such system if termination was the
result of the Client not agreeing additional charges for work regarded by the Company as essential to
ensure such safety and provided that the Company has nevertheless taken and exercised all
reasonable care and skill in such circumstances; and issue and invoice for work carried out up to the
point of termination.
11. Inapplicable Terms & Conditions.
a. If one or several terms or conditions mentioned in this document are not applicable, all other
terms and conditions still apply and the contract is still valid.
Terms & Conditions